Storage and How We Store Things in the Roadtrek - Part 3

PART 2 WAS THE LAST ARTICLE

We have had many readers contact us to write an article with photos of how we store things in the Roadtrek when we travel. Meryl is a master of finding a place for anything to fit - in the house, in the car, and especially in the Roadtrek. I asked Meryl to write this article. Here, once again, is Meryl...

PART 3:

 On the shelf over the toilet we have 2 fabric crates.  One holds cleaning type items - like Lysol spray, spray cleaner, etc.  The other holds personal type items - q tips, shampoo, bar soap for showers, etc.  On top of the box with personal stuff is the privacy curtain we made which hangs from the shower curtain track so that one can use the toilet en route without having to stop and pull the back window curtains closed.  Next to these boxes are a few latex gloves in a zip bag to use as it is easier to have a few out than pull the box out each time.  These are basically bathroom related items.  On the floor of the toilet compartment (we have an aisle toilet, not the permanent bathroom option) we have 2 boxes of camping toilet bags (wag bags).  Just in case something happens with the toilet we have these to use and we use them during winter trips when we travel without using the water system.  There are 2 boxes as one would shift around too much.

In the storage under the seat of the third front seat (in front of the toilet compartment) I have another set of personal and kitchen towels and another set of sheets and pillowcases sealed in plastic zip bags so that they can be changed on long trips.  The toilet chemicals are also in here.  I have a large accordion folder with the various instruction books and manuals in folders. A hair dryer is in here.   There is also a second spare  roll of toilet paper in here as it is easier to access quickly if needed.  We have quilted foil inserts (Reflectix) for some of the windows and they are also in here.  It is an area that can be reached fairly easily, but still takes some work, but is large.

We have a mesh net that goes around the back of the third seat which can hold magazines, brochures, etc. on the front of the seat.  It is a convenient place for these.

On the shelf over the door we have hats to wear if it is sunny and a jacket for me is rolled up in here.  There is a folding “gopher”, the thing to pick up items dropped on the floor (or items at the back of the space under the bed if one does not want to crawl under.)  In the pocket for the opera window covers we keep a folder with maps of and information about campgrounds which we go to on a regular basis.   

  

We have the overhead front drawer, which was an option when we ordered the Roadtrek.  This holds an assortment of items - folded up rain jackets, a zippered bag with tools, a rechargeable electric drill/driver,  another with spare parts, a clipboard that holds stationery items inside, two pop up garbage cans - one for garbage and another to hold wet umbrellas if needed - and a vinyl box to hold magazines brought along to read..  There is more than this, but this is all I can remember.  The items here are fairly light in weight and are used from nightly to as needed and need to be easy to access. 

In the pocket on the back of the passenger seat is a fold up umbrella and a very small fold up seat.  On the floor behind the seat (in the carpeted front area, not the dropped floor) is a bath mat rolled up that we use as a door mat for the second passenger door when it rains.

In my map pockets I have reflective markers that we put out on the campsite ground when we find a level spot so we can find it again, walkie-talkies to use when pulling in and finding level, as well as when we pull out of our driveway at home.  A red light flashlight to use when hooking up at night (red LED does not attract mosquitoes).  Rubberized, knit gloves to use when setting up in wet or cold weather.  Coupon holders (I have travel coupons and coupons for food and stuff and for restaurants that I pull from our car and house hen we travel.)  I also have an envelope that holds items I have collected at home for this trip - reservations, brochures, etc.  Car charger for laptop, basically stuff I might need from the seat while riding or on my way out the door.

In the compartment over the windshield, I have a spare pair of glasses, more spare parts - such as fuses - and other small items that are rarely used as this is not an easy section to access with the sliding top draw in front of it. 

The glove compartment holds glove compartment items.  We also have a plastic box between the seats which holds other items related to or needed while driving.  On the top of the glove compartment I have sunglasses and we have the labeled, leather tags that that we made to snap onto the steering wheel at night to remind us to check and take care of everything we need to before we drive off in the morning.  During the day we keep a remote thermometer for the refrigerator in one of the cup holders over the glove compartment.

I have no idea what “Me” has in his map pockets other than sunglasses and eyeglasses.

Moving back behind the driver’s seat where we started, in the pocket there is a folding umbrella.  On the floor between the seat and the closet (where we started) there is a very small folding table, a windshield reflector, and a small folding step "Me" made.    

 

On the shelf over driver’s door is “Me’s” jacket rolled up as mine is on my side. 
       

 Wherever there is space that needs to be filled to keep stuff from moving I put the crumbled plastic store bags or sweatshirts if we bring them.

In the rear of the Roadtrek, accessed from outside, we have 3 laundry baskets to hold assorted tools and items we buy en route.

In the storage section outside under the driver’s side we have a thin coiled general use garden hose,  a can of bug spray (sealed in a plastic bag) and a spare TV cable wire.  There are leveling blocks, the water filter, a piece of swimming pool noodle, 3 potable rolled water hoses stacked on each other with a small plastic box in the middle of them with water related items (such as a water pressure device, hose washers, etc.), then a slightly larger plastic box with electric related items such as polarity and voltage testers, 30 amp to 15 amp converter and vice-versa, 50 amp to 30 amp adapter converter, a portable RV surge/power protector , a TV coax cable wire and, of course, the Roadtrek's electric line to attach us to the campground’s electricity.  I try to keep the water related items separate from anything, such as the bug spray, that one would not want near one’s drinking water.

I think that covers everything.  There are always odd items (both in that they are not normally with us and often in what they are) that have to be fit in on different trips.  It is generally a quandary where to put them, but I always manage to find a place that fits them, even if it does not seem the most logical place.

Storage and How We Store Things in the Roadtrek - Part 2

PART 1 WAS THE LAST ARTICLE

We have had many readers contact us to write an article with photos of how we store things in the Roadtrek when we travel. Meryl is a master of finding a place for anything to fit - in the house, in the car, and especially in the Roadtrek. I asked Meryl to write this article. Here again is Meryl...

PART 2:

Next we move to the drawer.  We have assorted small items that we might need during the trip - kitchen scissors, a day of the week pill box that has OTC medications in it - aspirin, acetaminophen, etc. Not that we take them daily, but different meds are in the different days for convenience and so that we don’t need to buy bottles of each for the rare times they might be needed while we are traveling.  Hooks to go on either side of the Roadtrek and a rope to go across from them for laundry or drying towels are in here. Anything else like this is in here for easy access.

We move now to the back part of the Roadtrek.  The overhead cubby next to the kitchen holds 3 plastic boxes that stack on each other.  One box is items that we pack into our last minute bag as we go to bed the night before and get up in the morning before our trip - spare eyeglasses, prescription medications, etc.  The other 2 boxes stay in the Roadtrek and each of us has one.  This is the stuff we need to pull out at night for getting ready for bed and for getting ready in the morning.  Toothbrushes and paste, hairbrushes, combs etc.  We each put in our box what we decide we need.  I keep a spare charger for my cell phone in mine, husband (you know, "Me" in the site title) does not.  Next to these boxes in the cabinet there is a small open top plastic crate.  This holds items we might need during the evening or the morning, such as husband’s razor, that are a little too big for our individual boxes.  By having an open top crate they do not fall out when the cubby door is opened.  We also keep a lightweight tarp that comes in a case in here so we can easily throw it on the bed below so that if we need to go on the bed in our street clothes the bed is protected.  On top of all these boxes we keep a folded plastic shower curtain, which we use to cover the back of the bed if it may rain, so that when we open the back cargo door in the rain the bed will not get wet.  By keeping it on top it keeps the items below it from shifting (except when we need it on the bed of course).  We keep these items in here as it is easy to reach them from the aisle and they are near the kitchen counter, where most of them will end up.

The next cubby back on this side has odd items.  In the back area of the cubby we keep spare tee shirts to sleep in case we are cold at night.  There is a spare set of pillow cases in case they are needed.  All of these are in plastic zip bags to keep them fresh.  There is also a small plastic pail to use when we go to the shower at a campground to hold items needed for same.  In front of this, in the opening of the cubby door, I keep our spare shoes.  The spare shirts and pillow cases are out of the way, but can be relatively easily reached from the bed, which is where they would be needed.  The spare shoes are generally only used if the weather changes.  Generally we know about the change and can switch our shoes from the bed in the morning, but since they are in the door area, they can also be grabbed from the aisle in front of the bed if needed.  I have 2 plastic mattress covers on top of the shoes.  These are to cover seats if it is raining heavily and keep them dry and also helps hold the shoes in place.

In the cubby on the passenger side is all the TV related equipment as the TV is on this side.  To the rear of the cubby I have shower towels and washcloths also in zip bags.  I find this cubby is harder to reach as it is slightly higher than the ones on the opposite side as it is above the DVD player shelf.  So these items can be accessed for use, but during the night it would harder to reach stuff in here quickly than on the other side.  The pail on the other side should logically be in here, but since there is electronic equipment in the front I did not want anything which is not soft to prevent damage to the equipment.  

Now to go backwards a minute, I have under bed storage.  Since we do not have the automatic power bed/sofa we have extra storage.  We have a bench seat along each side of the Roadtrek, with an area filled in between them across the aisle at the rear of the Roadtrek.  Under the seat area on the driver’s side, next to the section with the water heater, etc. we have a cubby.  This serves different purposes depending on the trip.  Often it travels empty.  If we have the bed broken down while going for service, etc. it holds laptops and such.  If we are on a long trip it holds a laundry bag with an additional week’s clothing and after switching, the laundry bag with the dirty clothing.  A matching cubby on the opposite side already has items, such as the jack, in it and I keep a handheld vacuum in here.   Note that these 2 cubbies are where one would put one’s feet if one has one seat across the back that opens to a bed automatically.  In the cubby which sits opposite the water heater section there is the indoor water tank along the inside of the outside wall.  I keep a spare box of tissues, roll of paper towels and toilet paper in here between the water tank and the door to this cubby.  I basically keep items in these cubbies which are not needed on a constant basis.  I am the only one who can access these items when the bed is set up and anything in the center storage section (next paragraph) has to be pulled out to get to them. There is a cubby door to the area under the area filled in between the 2 bench seats at the back of the Roadtrek, but we have this area filled from the back and I don’t use this area for anything we need from inside.

When the bed is made up into a king bed (as opposed to making up the bed area as 2 twin beds) the area between the bench seats under the bed makes another storage area.  We have a 2 section holder that we bought at Harbor Freight intended to be used in car trunks, which is just short of the height of this section and takes up about 80% of the space across and 80% of the space front to back. 

 

 I put our "last minute" bag (stuff we need at home up until we leave is all tossed in here to come out to the Roadtrek for a trip) in here, sometimes laptops, stuff we buy en route, etc.  I also use the space to the side of it for laptops and a travel printer on some trips (leaving more space inside it on those trips) and the space in front of it for my backpack if I bring it.  This space, like where food is stored, varies on each trip as to what is traveling where.  Items here are a bit large to find other places to keep it in the Roadtrek.  I use 3 of the tension curtain rods across the front of the items (which may be further in than the front of the section) to help hold the items in place.  If I need to access the cubby under the driver’s side of the bed the holder needs to come out (and I need to climb under the bed in this opening to get to the cubby to get stuff out).  If I need to access the cubby with the spare paper goods I just need to move whatever is in the front.  The holder can be folded down for storage or if we need to get something else large into this area.  On one occasion I managed to get 2 cast iron flower pot holders into this area, on a diagonal mostly under the stuff there normally, and protruding out the front of the section into the aisle.

On the bed we put the laundry bag during the day and evening.  It is moved to the third seat when we use the bed.  We also have small plastic baskets that we put eyeglasses, cell phone, etc. in at night and these are left on the bed with a few items not needed during the day.  Items left on the bed are pushed to the side and placed behind the kitchen and the toilet cabinet so they don’t fly forward in a fast stop.

There is a cabinet which hangs over the bed on the passenger side and has the TV attached to it. (Older model Roadtreks had the TV on the driver's side.)  It has 3 shelves.  The top shelf holds 2 plastic boxes, similar to those used for food (again, crumpled plastic garbage bags helps keep these in place).  One holds first aid supplies and the other sewing supplies, both for emergencies.  The rest of this shelf is DVDs that “Me” (husband) has put here.  The middle shelf has an assortment of fabric zipper bags that “Me” has put in, that hold electronic accessories, chargers, camera related items and computer related items, as well as a box of latex gloves for use in dumping or anything else messy.  On the inside cabinet wall along this shelf to there is velcro which holds the remotes to the TV and DVD player on the cabinet wall when they are not being used. These items are here as they are easy to reach and fit the space.   The bottom shelf, which is considerably larger than the others, is one of those areas which holds different items on different trips.  In it normally is an empty gallon water bottle for use when we need to fill the toilet when we want water to flush the black tank without hooking up to the city water.  There is a battery operated lantern and the rechargeable power pack for the lantern.  There is a small, Bluetooth keyboard.  On various trips it will also hold camera equipment, sweatshirts, my embroidery case, etc.  (If this section is full with something else my embroidery case will go in the same section as the towels already mentioned.)  What goes on this shelf is stuff we need to be able to access and is too large to go in the smaller sections/shelves.

END OF PART 2 - PART 3 IS THE NEXT AND FINAL ARTICLE IN THIS SERIES

Storage and How We Store Things in the Roadtrek - Part 1

We have had many readers contact us to write an article with photos of how we store things in the Roadtrek when we travel. Meryl is a master of finding a place for anything to fit - in the house, in the car, and especially in the Roadtrek. I asked Meryl to write this article. May I introduce Meryl...

Hi.  This is Meryl.  I was asked to write about where  I store stuff in the Roadtrek and why I store stuff where I do.  Remember different Roadtreks are in different formations and yours may have different storage areas.

I have found that storage space in the Roadtrek is limited and that it is not always sized conveniently to use for what one needs to store in it.  This can result in something not fitting into a space or there being too much empty space left around the items in a storage area.  The trick is to maximize the storage space and fill in empty spaces around stuff so that the stuff does not shift around and break or make noise when one is traveling.  This often results in some odd combinations of stuff stored together and stuff not always in a place which makes sense.

I will start just behind the driver’s seat, because I have to start somewhere.  There is a closet that is designed to have about a dozen hangers in it.  We put in a set of hanging shelves that are intended for sweaters and such.  The shelving unit is about 6 shelves in length, but there is only room for four of the shelves, the bottom two are collapsed.  We each use 2 shelves.  I find that the shirts for each of us will take up a section and a spare pair of jeans and underwear and socks for each of us will take up the other 2 sections.  I can fit up to a week’s worth of clothes in these shelves by careful planning and squeezing of stuff.  We plan to replace the hanging unit with shelving which would allow us to use more of the space and fit more clothing, but have not had a chance to do so.  On the shelf in the closet above the hanging area we keep our slippers.  On top of the closet is an electric fan.

Next back is the kitchen.  We do not cook in the Roadtrek.  I, therefore, only need to have foods for snacks and occasional lunches from farmer’s markets, although I do bring a couple of cooking pots and dishes just in case.  Under the sink/stove/counter we have a small cabinet with 3 shelves.  The bottom shelf, which is the tallest, we have put a plastic drawer in.   

When we travel on longer trips I put soup cans, and such in it.  I use Snapware boxes for food storage so that it is sealed off from attracting animals and usually put a larger box (10 in x8.5 in) with saltine crackers either in the drawer (if I don’t have soup and such) or on top of the drawer as I could not figure out how to put stacks of crackers in the limited size top sections where I put food.  If we are traveling in winter without water in the tanks, I put a box on top of the drawer that we put in the sink at night so that we can wash, etc. and not have the water in the sink. The next shelf up has a large plastic box without its lid, which holds pots, paper plates and cups and other kitchen items that we do not normally use on trips. I put pot holders between the pots to keep them from banging together.  The top shelf also has a large plastic box without its lid.  I don’t keep the sink counter insert in the sink and keep it under this box.  This allows the box to slide like a drawer.  It has the more common kitchen stuff we use when traveling - cups, napkins, plates,  silverware, a plastic measuring cup that I use in the microwave for heating water.  I put paper plate between the regular plates to keep them from hitting together.  If we travel in cold weather without water I will generally switch the paper items from the lower box to the top one and the real plates and cups to the lower one as the top box is much easier to pull in and out for use.  On the sides of all three shelves I have boxes of plastic bags - mostly zip locs in different sizes.  This uses the wasted space and keeps the boxes and drawer from sliding around.  Next to the drawer on the bottom shelf I also keep a collapsible dish pan.  Crumbled shopping bags are in both boxes around items to keep them from shifting about.  In the box on the inside of the door of this cabinet is dish washing liquid, liquid hand soap and mouthwash in plastic bags.

I made a double pocket holder for the microwave to keep the plate safe - one pocket holds the plate, the other the turning piece. The pocket was made from bath towels, sized and stitched together. I keep the roll of paper towels currently in use in here as it is convenient and helps keep the microwave plate in place.  I also have a piece of swimming pool noodle which stands up and down between the plate and top of the microwave to keep the plate in place when traveling.

I have 2 thin sections at the top of the kitchen section for storage.  The lower one is shorter across, but is taller.  The top is longer across as it sits above the microwave, but is very short in height.  

 I have found that Snapware food units are very good for storing food.  I was told to make sure that food is sealed airtight so that it does not attract any sort of vermin or animals and these do a good job.  I use 4.25 in x4.25 in (1.25 cup), 4.25 in x 6 in (2 cup), and 6.25 in x8.5 in (4.5 cup), all of which are 2.25 in. high, boxes in both of these sections.  I also use taller versions - the 4.5 cup in a 4.5 in. height which is 10.8 cups, and the 2 cup in a 6.25 in height which is 7.3 cup in the lower of the two sections as these do not fit in the top section.  I use different sizes for different items, for example, tea bags go in the smallest size, snack bars go in the 4.5 cup and cereal and applesauce cups go (separately) in the 7.3 cup size.   I don’t use round boxes as they waste space.   I sometimes use both sections and sometimes use one or the other section depending on the length of the trip and the amount of food (snacks) we have brought.  Our last trip I put all the food items in the lower section.  This time we are away a couple of days less and I did not have enough of the food containers to properly fill the lower section, so I lined them up in the upper section.  They never fill this section across completely, so I stick crumpled plastic shopping bags to fill the extra space.  I have a tension curtain rod (from Walmart, they are like the tension bars sold for RV refrigerators, but cheaper and easier to deal with as they are not doubled) and I put it across the top of front of the lower section to help keep the containers in place.  I also stick crumbled up plastic shopping bags around any spaces in this section.  When we travel on longer trips I fill both sections.  Every time I use these sections the boxes fit differently as different ones are used.  When I use only one section for food the other section will be filled with whatever fits and needs to be stored - the fabric bags I use to bring the food items in and out of the Roadtrek, laundry bags (we bring our clothes into the Roadtrek in them and then use them for laundry) or even sweatshirts. I use Snapware as they have flat tops and stack well (and I bought 2 sets of them on sale at Costco).  I have similar boxes from other brands that work as well and use them in other places in the Roadtrek.  The Snapware company has recently changed them and new ones may not fit in the space the same or have the same volume.

I think that why the clothes and kitchen items are where they are is fairly obvious, so I offer no further explanation. I offer no explanation about the refrigerator for the same reason, other than to mention that I use a tension curtain rod, as previously mentioned, on the front of each of the 2 shelves in our fridge to keep items from sliding forward and out when the door is opened after driving.

END OF PART 1  - PART 2 IS THE NEXT ARTICLE

Roadtrek's Cabinet Latches

 

 

 

 

 

 

    AN UPDATED ARTICLE ABOUT ROADTREK CABINET LATCHES HAS BEEN WRITTEN.  SEE THAT ARTICLE HERE! 

Roadtrek uses several different cabinet latches for the cabinets in the Roadtreks. The challenge in an RV is that a cabinet latch needs to keep a cabinet closed with the bouncing, vibrations, and shaking of a vehicle while driving. Something that is not necessary for a cabinet in a house. Some of the latches used are standard household latches on cabinets that will resist the extremes of this challenge. Some are special latches and these latches are available only from Roadtrek. A number of Roadtrek owners complain that the latches used break easily - and we have had two different latches break since we bought our 2011 Roadtrek. We will look at each latch and ways to keep it working as best as it can without breaking. Not all Roadtrek models use the same latches in the same places, but you should see in this article latches that are in your Roadtrek.

The latch -

And its catch -

This latch is the most used latch in our Roadtrek. It is on a number of cabinets. There is no visible release when looking at the cabinet doors.

The release is located in the lower edge of the door, in the middle on these cabinets shown above. 

Looking up from the bottom of the cabinet door, the latch is hidden in a cutout. To release this latch you push up on the long button that you see above and pull forward on the cutout to open the cabinet. Look above at the top photo and you will see the latch itself and how it works. When you push up on the button you are pulling the plastic wedge in front of the button up and into the latch and above the metal catch that is on the inside of the cabinet. 

This latch breaks easily. When closing the cabinet door the plastic wedge must must be pushed up and over the metal catch by scraping against the metal putting a lot of pressure on the mechanism and eventually breaking. Some break internally and will prevent the door then from opening as when you push on the button it no longer is able to move the wedge up. Since the hinge is inside the cabinet there is no way to open the door without forcing the door open or trying to push a flat, thin, and strong object (like a thin paint scraper in through the space between the cabinet and the door and moving the wedge up - but the wedge is behind the metal catch so you must not only get blindly to the right spot but so so behind the metal catch. It is possible. I did it when ours broke this way.  It has been suggested that by pushing up on the bottom edge of the cabinet and pulling out, the latch will release but this was not the case when I had to get the cabinet open when the latch broke. The door was solid and would not move in any direction.

If you look to replace this latch you will find one that looks very similar at many RV shops including Camping World, BUT that latch while looking like this one, is not the same size and the installation holes will not match the holes in your cabinets. The catch that this other latch uses is nylon and not metal and much lower than the metal catch. It does look like it might work better with the catch gliding over the nylon catch instead of scraping over metal. The latch used by Roadtrek is only available from Roadtrek. When one of ours broke and I learned that it had to be ordered from the Roadtrek factory or purchased at a Roadtrek dealer/service that stocked it, I purchased three spares in addition to the one that needed to replace the broken latch. I went to our Roadtrek dealer/service and their store did stock the Roadtrek latch, but they were out of stock. I was told that these sell out quickly. They ordered four latches for me at $10 each latch. Some have been able to have these broken latches replaced by service under warranty. That was not offered to me when I went to the service center. They were shipped to me (at my cost) and they arrived in ten days to my address.

There is a way to avoid these latches breaking. When you close the cabinet door always be sure to push the latch button in and hold it in until the door is completely closed. This will prevent the plastic wedge catch and the metal edge of the catch from putting a strain on the mechanism and stop the scraping of the catch every time the cabinet door is closed. 

Next -

The latch -

The catch -

What it looks like on the outside of the cabinet LOCKED -

What it looks like on the outside of the cabinet UNLOCKED -

To open this latch you push in on the lock - the round circle on the outside of the cabinet. This will release the latch from the metal catch inside and also pushes the door open at the same time. This latch is used on some newer Roadtreks or perhaps only the Sprinter Roadtreks on many cabinets that the first latch is used in our Roadtrek. In our Roadtrek this latch is only used on the bathroom door and on the wardrobe cabinet door. When you close the door with these latches you push in the button and it will click into place and lock the door closed.

It is reported that this latch breaks easily also. Roadtrek has said that if the door is closed with the latch in the locked position (as shown in the photo two above) the latch will break. When the latch is open, the middle of the circle pops significantly out and stays out - as shown in the photo two above - and I am not sure why anyone would push this in while the cabinet is open, but apparently some do and the latch will break inside. One of these on ours - we have one on the wardrobe and one on the bathroom door - sticks when pushed in to open and the door needs to be given a gentle push in and then the button pops out.

This latch also can only be obtained from Roadtrek. If you need a replacement, a Roadtrek dealer/service center will order them for you. If you order a replacement, order spares at the same time.

Next -

The latch -

The catch -

This latch is a stock household cabinet latch found at most home stores at less than $2.00. This latch should not break unless the door is misaligned with the cabinet and the latch does not hit the center of the rollers when closed. In my Roadtrek this latch is used in combination with the latch just above on the bathroom and the wardrobe cabinet doors. The mechanism is simple. The point of the catch passes through the nylon rollers and is caught between them and a strong spring. To open you just pull. To close you just push.

Next and last -

The latch -

The catch -

This latch is also a household latch that can be found at most home stores and I replaced a broken one of these latches for less than one dollar. With this latch the metal clip surrounds the outside of the nylon rollers and holds on behind them. Outside the cabinet door has a pull knob attached. We only have this catch on one cabinet - the pantry cabinet over the sink. On our cabinet, I discovered - after one arm of the metal catch broke off - that the door is out of line and this catch was not going around the rollers but rather one arm of the metal was going into the center of the rollers - and at the same time cutting into the edge of the cabinet (which has a metal edge) every time the cabinet door was closed. On close examination I could see that the door was not evenly aligned. To close this cabinet now, we push up on the door bottom as we close the cabinet so that the metal arms of the catch clear the edge of the cabinet and listen for the click of the catch locking around the rollers. I did try to adjust the alignment of the door but I could not and will explain why in the next paragraph.

Cabinet Hinges -

The horizontal cabinets have these hinges -

I have recently learned that all hinges used by Roadtrek are not created equal. The above hinge is what is in the cabinets in my Roadtrek. Other Roadtreks - by model? - perhaps just Sprinters - by year? - perhaps after 2011? - have a similar looking hinge that is a much heavier metal and has an adjusting screw in the middle that will widen and lessen the gap between the the door and the cabinet where the hinge is attached. Those hinges are common and are called in woodworking among other names, European hinges. A lot of knockdown furniture uses those hinges. To adjust a European hinge to align the cabinet door you turn one or more adjusting screws - simple. Now, in my Roadtrek and I am sure many others, the hinge that you see in the photo above has no adjusting screw. There is a small adjustment possible IF the screws holding the hinge were aligned with each other exactly on installation by loosing the screws and then sliding the entire hinge forward or back. That would be fine but I have found more than once that if the wood screws in the Roadtrek are loosened they do not always tighten back again. I tried to do this with the cabinet latch above and the hinges on that cabinet to adjust that latch from hitting the edge of the cabinet but the screws were stripping the wood with just the slightest adjustment and I stopped. Yes, I know about wood filler and how to put glue and a matchstick or steel wool or toothpicks into the holes and screw into them again (I have been a woodworker for a long time), but I was not going to do this and hope it would go back together. So, be very careful if you decide to take out or loosen wood screws in the Roadtrek as they don't always have anything to screw back into.

Some cabinets have metal piano hinges - a long strip of hinge. These cannot be adjusted at all. 

So there you have the cabinet latches found in Roadtreks. Perhaps in older Roadtreks there were different latches used. If you would like to change these over to other types of hinges it is always possible but you will need to make different holes in the cabinets and may need to cover any cutouts that these hinges require in the cabinet doors. Be sure to find latches that will withstand the motion of the vehicle as it travels and will not release and spill the contents of your cabinet all over.

Fast and Easy Way To Add Shelves to a Roadtrek Wardrobe Cabinet

In our 2011 190 Popular Roadtrek we have a wardrobe cabinet behind the driver's seat. It is set up with an RV "rod" to hang hangers from. Not many articles of clothing will fit in this cabinet if one tries
to hang them on hangers. It is possible to carry a more than a week's clothing in this cabinet by adding shelves.
 

The fastest way to install shelves is to purchase a soft-sided hanging shelf or "cube" unit from a closet or home store. These are found in almost every discount store, department store, linens store, etc. We looked at several before we found one that was going to fit just right inside the Roadtrek cabinet.

One thing to be aware of is that any of these that you buy will be too long for this short cabinet, but that is not a problem. Once inside the excess shelves will fold flat at the bottom. The one we selected, shown in the photo above, fits the width of the cabinet. As you look at the photo, you are seeing the rear dining table leg through the translucent vinyl back of the unit. We don't use the rear dining table, but if you did, it is no problem to get it out past the soft shelves. The unit did not come with the boards that you see on our shelves. I added these. Without the boards the shelves do sag down under the weight of the clothes and will limit the space that you can stack in on the shelf below. All I did was measure the soft bottom of each shelf, and cut out a piece of thin fiber board to those measurements. Now our shelves have solid bottoms.

To use the shelves, just fold and stack your clothes. Everything comes our nice and neat with no wrinkles. And we can put over a week's clothing on the four shelves that you see here.

One thing that made this particular soft shelf unit best were the two hangers that it hangs from. These make it stable in side the cabinet and it does not move around while driving. There is no noise from this unit while traveling - even with the fiberboard shelf bottoms.

We found this unit at Target. We had purchased two others at other stores. This is the only one that had two hangers and the only one that fit the space perfectly.  Some units like this have a soft tube to put around the closet rod - this type will not work with the RV closet "rod".

This method of adding shelves is inexpensive and all it takes to install it is hang it up. If you decide that you want to hang from hangers, all it takes is to take this out and let it fold flat to store.

Now, this works well, but I have been thinking about more permanent shelves in this cabinet. To do that I want to have shelves that are adjustable in height. I also want to be sure that the shelves do not move while the Roadtrek is traveling. With all of the shakes and rattles that you get when driving on even some of the smoothest roads, I don't want to add another source of noise with shelves bouncing with every bump in the road. To do this I have been looking at hardware that would let me sandwich a shelf in-between a top and a bottom clip on each corner. This is not that hard to find and stores like Home Depot and Lowes do sell systems that will let you do this (though they are not intended to use two clips in this way). Since we don't use the rear table we have been considering removing it all together and eliminating the pole in this cabinet which would limit the size of the shelves that could be fit in. One option is to cut the shelf around the pole. This is a project on the list of things to do in the Roadtrek "at some point". In the meantime the soft shelves work just fine.